11
Patented in USA, Japan and Europe.
USA Patent #: 6,761,304
FOCUS "A" is a low-cost convection rework system with closed loop temperature control. This is a basic but most modern rework tool. Ergonomic, reliable and simple to use. Has built in Heat / Cool Switch for Convenience.
FOCUS "A" hot air station features a powerful heater to precisely remove even high mass components from multi-layer boards. Temperature and Airflow are continuously variable. The unit has built-in air-pump to deliver full range of airflow. The system's temperature controller features zero voltage-switching circuitry for spike-free and safe application of power to the heater. Optional XFS–1 foot switch can be used to turn the system on and off.. Releasing the foot switch turns the system off. The hand piece of the FOCUS "A" is ergonomic, ESD safe and user friendly. It features a push button switch, which turns the system on and off at a touch of a finger. Convenient XQF Quick Connect allows change of the nozzles in few seconds time. End of the hand piece is not perpendicular to the axis of the tool minimizing cable and air line pull on the tool during hand-held operations. Selection of 50+ nozzles and quick turn-around on custom nozzle orders, which are made with minimum surcharge makes removal and replacement of any SMD components possible and easy. Modular and unique (patent applied for) nozzle design reduces time to make custom nozzles if required.
Input Voltages | 110-120, 220-240V AC |
Power Consumption | 500 W |
Fuse | 5A
for 110-120V or 3.15A for 220-240V Slow-Blow 5mm x 20mm |
Heater | Resistive, 450W line voltage |
Heater Control | PID, Closed-Loop Thermocouple sensor feedback |
Air Source | High efficiency diaphragm pump |
Air Flow | Variable, 3 - 20 l/min, air flow controlled by the valve located on the front panel |
Temperature | 150
ºC - 450 ºC (302 ºF - 842 ºF) |
Vacuum source | Diaphragm pump |
Vacuum | 200mmHg (8" Hg) |
Weight | 2.5kg (5.5 lbs) |
System dimensions | 150mm
x 220mm x 170mm (5.9" x 8.7" x 6.7") |
Packaged weight | 3kg (6.6 lbs) |
XN Series - FOCUS Series Nozzles |
Interested
Companies to distribute this product in their countries are welcome to contact: czes@bokar.com or call USA at (570) 842-2812 This is a tool which is designed to make SMT rework easier, less time consuming and properly done to guarantee appropriate process control. |
TO
BUY please see SMT Distributor of Bokar International in Your Country |