11 FOCUS "X" Series Programmable SMT Rework/Repair Unit / Rework Systems Controller

FOCUS "X" Series Programmable
SMT Rework/Repair Unit / Rework Systems Controller

See and compare. There is no other tool
offering this level of performance in its class.

Patented in USA, Japan and Europe.
USA Patent #: 6,761,304

The Unit offers the economical solution for sophisticated Rework.

Mature PCB Assembly and Rework industry of the new millennium requires reliable, accurate and not over priced tools for precision service and rework, which fulfill all the requirements of Process Control.

CE Mark

 

Focus "X" Programmable SMT Rework/Repair Unit

Focus "X"
Programmable SMT Rework/Repair Unit

XNR-2
Hot Nozzle Handling Cup
XFS-1
Foot Switch
XVCS-5
Vacuum Cup Set (5 vacuum cups, 3 sizes)
XT-1
Vacuum Cup placement/removal tool
XK-TC30/36
XK-TC30/36
"K" Type Thermocouple, gauge 30, lengths 36"

FOCUS "X", the newest system in the industry, offers total process control and best performance among convection Rework/Repair Tools. As the only system in its class can pre-program both top and bottom heating in individual zones. It is simple and easy to use. It has five time/temperature zones to accommodate lead-free solder profiling requirements (four heating and one cooling zone). When used in conjunction with X-1001 Series Prehearers or SMT-ServiCE Rework units offers 10-zone control 5 top and 5-bottom temperature settings during the rework process. For someone who really wants to bring the rework to a science, the unit has an extra mode to work in 10 zones (control the temperature rise in each of the 5 zones and maintain the reached temperature for preprogrammed period of time).

FOCUS "X" with X-1001 Series Prehearers or SMT-ServiCE Rework units offers 10-zone control 5 top and 5-bottom temperature settings during the rework process.

Rework of any component using FOCUS "X" is not a burden but an easy, routine repair/service task without worries that not careful or new on the job operator will damage the board during the rework process.

User programmable offset and pre-programmed bottom heating enable temperature accuracy and repeatability not found in any tools offered by other brands.

FOCUS "X" Digital SMT Convection Rework System has been designed to perform safe and efficient rework of SMD and BGA components. Microprocessor Profile Controller allows the operator to select or pre-program the appropriate removal or placement profile and start the rework sequence. Removal and placement profiles can be stored, recalled and edited with the touch of a button to guarantee process control. The profiles can be locked to eliminate operator adjustment. Programming is user friendly and can be learned in a matter of minutes.

FOCUS "X" offers 3 modes of operations: Lift Mode with 1 pre-programmed removal profile and 40 user programmable profiles, Placement Mode with 1 pre-programmed profile and 40 user programmable profiles and Hand Mode with pre-programmed maximum temperature and 40 user programmable pre-set maximum temperatures.

FOCUS"X" can be controlled from a PC by XFR Commander Control Software.

Lift and Place Modes offer five (5) time/temperature zone control and also pre-programming of temperature settings of the bottom pre-heater in each of the 5 zones.

The system has several unique features, which makes rework more accurate, safer and consuming less of valuable time.

  Features:

FOCUS "X" is the only system in the industry today giving pre-programming of the bottom pre-heat in each zone. Such powerful functions may be found only in systems with price tag far exceeding 25.000.00 USD.

  System includes:
  Focus "X" comes in 3 different configurations:
  Technical Specifications:
Input Voltages 110-120, 220-240V AC
Power Consumption  750 W
Fuse 8A for 110-120V or 5A for 220-240V
Slow-Blow 5mm x 20mm
Heater Resistive, 710W line voltage
Heater Control PID, Closed-Loop Thermocouple sensor feedback
Air Source High efficiency diaphragm pump
Air Flow  Variable, 3 - 20 l/min, air flow controlled by the valve located on the front panel
Vacuum source  Diaphragm pump
Vacuum  200mmHg (8" Hg)
Temperature 70 ºC - 450 ºC
(158 ºF - 842 ºF)
Weight 10kg (22 lbs)
System dimensions 150mm x 220mm x 220mm
(5.9" x 8.7" x 8.7")
Packaged weight 12kg (26 lbs)
  Optional Equipment:

XN Series - Focus Series Nozzles

Nozzles for FOCUS

XHT-1P - Small handle hot air pencil (250W) for Focus "X" and Focus "+"
XHT-1P - Small handle hot air pencil (250W) for Focus "+" XHT-1 - Small Handle, High Power Hot Air Tool with Mini Nozzles
XHT-2X - Mini Hot Air Tool with vacuum (250W) for Focus "X"

XHT-2 - Mini Hot Air Tool with vacum (250W)

XM Series - Mini nozzle range

Mini nozzle range

Hot Air systems accessories

Optional accessories

XK-TC30/36-5 - "K" Type Thermocouple, gauge 30, lengths 36", pack of five pieces

XCB-1R - Cord connecting Focus "X" with Preheater Based Rework System SMT-SerwiCE or Preheaters X-1000.
Interested Companies to distribute this product in their countries are welcome
to contact: czes@bokar.com or call USA at (570) 842-2812
This is a tool which is designed to make SMT rework easier,
less time consuming and properly done to guarantee appropriate process control.
TO BUY please see
SMT Distributor
of Bokar International
in Your Country